BioGuard Burn Out 3 ®


Categories : Monthly Special, Pool Chemicals

Brand: BioGuard

SKU: BIO22808

BioGuard Burn Out 3 ® : Product Information

Shock treatment

Product Information

  • 57.8% calcium hypochlorite
  • 57.8% available chlorine
  • pH 10.2
  • Maintains sparkling clean, clear water
  • Destroys organic contaminants
  • Quick Dissolving
  • Suitable for vinyl and plaster pools
  • Use once a week

Directions For Use

  1. Ensure all pool equipment is working properly.
  2. Backwash or clean filter system according to manufacturer’s directions.
  3. Adjust pH to between 7.2–7.6. In chlorinated pools, add a minimum 30–40 ppm stabilizer level to reduce the effects of sunlight upon the chlorine residual. Do not add stabilizer to bromine treated pools.
  4. Check for metals before using this product. If present, add BioGuard Scale Inhibitor to prevent metal staining on pool surface.
  5. When using other products as directed and in conjunction with this product, always follow directions on those products.

For Shock Treatment

  1. Apply this product at a rate of 1 pound (see Application Method) per 20,000 gallons every week (alternatively 1 pound per 10,000 gallons of water every other week) into the deep end of the pool when the pool is not in use (preferably at night).
  2. Reapply after heavy rain or heavy bather loads.

For Superchlorination

Superchlorination is needed when cloudy water, strong chlorine odors, eye irritation, or high levels of combined chlorine are encountered.

  1. Apply this product at a rate of 2 pounds (see Application Method) per 12,000 gallons of water into the deep end of the pool when the pool is not in use (preferably at night).

To Kill Algae

To kill algae when algae growth is evident in the pool:

  1. Brush all pool surfaces with a surface compatible brush prior to application of product.
  2. Apply this product at a rate of 2 pounds (see Application Method) per 12,000 gallons of water into the deep end of the pool when the pool is not in use (preferably at night).
  3. Keep the circulation system operating continuously for the next 24 hours, then backwash or clean the filter.

Application Method

  1. With the pool pump in operation, broadcast the product evenly into the deep end of the pool.
  2. Continue to operate recirculation pump for 4–8 hours (24 hours for Algae Kill) after product addition.
  3. In pools with potentially bleachable surfaces such as vinyl, paint, fiberglass, or colored plaster, brush any undissolved product from pool surfaces.

NEVER ALLOW UNDISSOLVED PRODUCT TO REST IN CONTACT WITH BLEACHABLE POOL SURFACES.

Note: In shallow pools with a depth less than 4 feet or when water is less than 65° F, predissolve this product and apply evenly around the edge of the pool. Dissolve this product outdoors in a clean plastic bucket, stirring with a clean plastic or wooden spoon. Add this product to water; NEVER add water to product. NEVER add more than 1 pound of this product to less than 3 gallons of cool water.


NEVER MIX THIS PRODUCT WITH ANY OTHER PRODUCT.

Re-entry into treated swimming pool is prohibited above levels of 4 ppm chlorine due to risk of bodily injury.

People who bought this also bought...